|
|
|
|
- Read and follow all manufacturer INSTRUCTIONS on the adhesive container.
- Installation area should be DRY. New poured concrete should be CURED for a minimum of
21 days.
- Sweep the desired location to remove loose dirt and debris.
- Protect tiles from direct sunlight to reduce
heat accumulation prior to applying adhesive
to the tile. This is recommended to extend
adhesive workability time.
- Remove tube top, pull cap, cut bag tips, apply nozzle and insert into a heavy duty or battery
operated caulking gun.
- Dispense adhesive until a uniform mixture is achieved prior to applying adhesive to tile.
7. Apply a uniform bead (approximately ¼”) of adhesive to THE CENTER of all marked and
scratched areas.
- Place the detectable warning tile at the
desired location and apply pressure. Adhesive
should squeeze out around the perimeter of
tile.
|
|
|
|
|
|
